The Faith Frequency AC Power Supply Series is a standard AC power supply that simulates AC power from all over the world. The device internally converts the DC to DC, and the DC-to-AC rectification inverter converts the inverter to output a stable and pure sine wave. Faith's variable frequency AC power supply provides 0~300V (300V or more customizable) and 40~499.9Hz output range. It is not only suitable for general civil products (47~63Hz) test application, but also for military and aerospace applications with 400Hz demand. And communication applications!
FTL is a high performance, versatile, medium and small power, series programmable DC power supply. The product is stable and mature, and has comprehensive protection functions such as overload, polarity reversal, overvoltage, overcurrent, over temperature, etc., which can keep the power and load in the unstable environment. With an adjustment ratio of less than 0.01% and chopping and noise of less than 1mVrms, FTL automatically selects internal continuous or dynamic loads for applications such as current surges. The FTL series is suitable for both high-index laboratory use and high-performance test systems.
The FTP series wide-range programmable DC power supply is a high-performance DC power supply developed by Faith Technology. It has a wide range of output, high power, high current, low ripple noise, fast transient response, high resolution, high precision, and voltage and current slope. Settings and other advantages. FTP series wide range programmable DC power supply is ATE system integration, laboratory test, vehicle equipment test, solar inverter test, DC/DC converter test, automotive electronics, engine start test, superconductivity test, motor test, battery charge simulation The best choice for applications such as voltage/current sensor calibration, laser testing and power supply, and electronics lifecycle testing.
Single power supply voltage 0~1500V, current 0~750A. FTH series program-controlled DC power supply is a high-power DC switching power supply with high power, high current, low ripple noise, fast transient response, high resolution and high precision. Can be used in laboratory testing, automotive equipment testing, solar inverter testing, DC / DC converter and inverter testing, engine start testing, battery automatic charging, electronic product life cycle testing and more. The FTH Series Programmable DC Power Supply offers many unique features for power supply, system integration, industrial, battery charging and analog, electric vehicles and electric motors. 3U/15KW high power density, accurate output current and voltage measurement, output trigger signal. A complex DC transient waveform can be simulated to test the device's ability to trip, drop, and other voltages. The FIS series of program-controlled DC power supplies, including 15 different models, range from 5 kW to 15 kW, with current ranges up to 250 A and voltage ranges up to 600 V. FTH series program-controlled DC power supply can easily connect 5 instruments in parallel, and the power is cascaded to 75KW for high-power applications.
FTG DC switching power supply is the result of many years of continuous research and development in the field of power electronics. FTG power supply has the advantages of high power and high current, low ripple noise, fast transient response, high resolution and high precision. Can be used in laboratory testing, automotive equipment testing, solar inverter testing, DC / DC converter and inverter testing, engine start testing, battery automatic charging, electronic product life cycle testing. The FTG series power supply is the representative of the highest level of power supply available today, with high load response speed and very low ripple noise. The unique circuit design and thermal design make this power supply have a very high power density, and the 3U height can support 15KW. The FTG series power supply adopts a modular stacking architecture, and the modules are connected by a high-speed external bus. Therefore, the power supply has the structural advantages of being easy to maintain, easy to expand, and highly reliable. Editing the sequence file enables the power supply to output complex voltage and current waveforms. Users can edit files according to their needs or with reference to various test standards. Digital and analog programming capabilities make power applications more widely available. The FTG power supply with color TFT LCD display and dual knobs has a friendly man-machine interface, and its rich display content and convenient call operation provide users with great convenience. Users can remotely operate the power supply via LAN, RS232 or GPIB communication interfaces. The FTG series power supply has a built-in power-on diagnostic program that reduces machine failure rates. Protection functions such as overvoltage, overcurrent, overpower, and overtemperature can greatly improve equipment reliability. Intelligent fan control not only reduces noise, saves energy, but also improves power supply stability.
The FT8300 is a dedicated test system developed by Faith for the self-contained design of super-capacitor research and development. The system is capable of high-accuracy testing of electrical capacitance such as super capacitor capacity, equivalent series resistance (ESR), and leakage current (self-discharge). Combined with intelligent computer technology and communication technology, the system can automatically control the test process under the control of PC software, which greatly improves the test quality and saves people's cost. The system supports a variety of test standards, supports user-defined test flow, and is easy to use.
The FT66100A series electronic load is suitable for testing various DC power supplies, batteries, chargers, LED drivers or related equipment. It includes basic test modes such as CC, CV, CR and CP. It also provides LED test mode and dynamic test function. The dynamic frequency can reach 20KHz. The FT66100A series of electronic loads have flexible and fast recall functions, which can easily call various stored parameters, which can significantly improve the efficiency of the pipeline. The FT66100A series electronic load provides over-current, over-voltage, over-power, over-temperature, voltage inversion, and other protection functions. It also has Von, Voff function and hardware programmable current and power limit protection for the device under test. This comprehensive protection ensures the quality and reliability of the product. The product provides powerful test functions and a large-screen human-machine interface. The host and module adopt a one-to-many structure, which is very suitable for building a power test platform. Its powerful functions, excellent performance, good stability, and the powerful PC software of Faith Technology are undoubtedly the best assistants in your work.
FT8100 series super high power feeding type DC electronic load, mainly used in charging piles, power batteries, generator sets, power supply detection and aging. The FT8100 is a new generation of power electronic detection system introduced by Faith's many years of electronic load technology. It adopts the grid-connected feedback principle and the all-digital vector control technology of DSP real-time processing. It can perform constant current, constant resistance and constant on DC equipment under test. Power, and its sequence testing. When the function, performance, and aging test of the device under test are completed, the energy is returned to the grid. Not only greatly save energy loss, but also make the equipment energy density higher, the test is more stable and reliable.
The FT6900 series of ultra-high-power DC electronic loads adopts the high-speed real-time array control technology of international advanced level, which realizes the module stacking structure of super high-power electronic load, and the modules are connected by external cables. The FT6900 features a stacked module design for high reliability and maintainability. At the same time, the product inherits the traditional features of Faith's high-power electronic load: rich in functions, strong adaptability (strong anti-self-excitation ability), and high reliability. The products are mainly used in electric power electronic testing fields such as electric vehicle charging devices, power batteries, high-power DC power supplies, and DC generators. The FT6900 series is divided into three voltage specifications of 150V, 600V and 1000V. The single power range is from 15KW to 54KW, and the maximum current is 1620A. Can accept the user's individual needs, customize products up to 1200V, maximum 500KW. The FT6900 includes basic test modes such as CC, CV, CR, and CP. Dynamic test and sequence tests are also available to simulate various dynamic load changes with transient frequencies up to 20KHz. The user can also simulate a short circuit operation by pressing a button. The FT6900 features a power battery (or super capacitor) capacity test and internal resistance test. This gives it a unique advantage in battery and supercapacitor testing. The FT6900 has a rich interface, friendly interface and easy operation. The TFT color display, knobs and numeric keys on the front panel allow quick operation and setting on the load. The FT6900 provides RS232, LAN, GPIB and other communication interfaces. These interfaces are connected to the computer and can be easily controlled remotely using standard SCPI programming instructions. The FT6900 electronic load provides over-current, over-voltage, over-power, over-temperature, voltage inversion, and other protection functions. It also has Von, Voff function and programmable protection for the device under test. These features greatly enhance the reliability of the product and are a trusted product for engineering test and automated test system integration.
FT6800 series high-power electronic load, single power from 2.6KW ~ 52KW, voltage up to 1000V, maximum current of 1200A, support up to four FT6800 can be cascaded synchronously to form a higher power electronic load. Mainly used for testing high-power power systems, power battery packs, power electronic components and other products. The FT6800 series of electronic loads include basic test modes such as CC, CV, CR, and CP. Transient and sequence tests are provided to simulate changes in various dynamic loads with transient frequencies up to 20KHz. The user can also simulate a short circuit operation by pressing a button. The FT6800 series has a unique battery capacity test function. This makes it a unique advantage in the field of battery testing. At the same time, the electronic load integrates timely and accurate voltage and current measurement functions, allowing users to make timely voltage measurements and adjustments online. The FT6800 series has flexible operation. Quick operation and setting on the electronic load can be achieved through the color display on the front panel, knobs and numeric keys. The FT6800 provides communication interfaces such as GPIB, RS232, and USB. These interfaces are used to connect to a computer, and remote monitoring can be easily implemented using a standard command system. The FT6800 series electronic load provides over-current, over-voltage, over-power, over-temperature, voltage inversion, and other protection functions. It also has Von, Voff function and programmable protection for the device under test. This comprehensive protection ensures the quality and reliability of the FT6800 series. The FT6800 series features programmable analog inputs (0 to 10V) for complex waveform loading. At the same time, the FT6800 series provides voltage and current monitoring ports (0 to 10V) to monitor voltage and current waveforms in a timely manner.
Load characteristics The FT6400 features a modular design, rich functionality, strong adaptability (strong self-excitation), high reliability and high maintainability. Mainly used in: power battery, medium and large power DC power supply, DC generator and other power electronics testing fields. The FT6400 includes basic test modes such as CC, CV, CR, and CP. Dynamic test and sequence tests are also available to simulate changes in various dynamic loads with transient frequencies up to 20KHz. The user can also simulate a short circuit operation by pressing a button. The FT6400 has a battery capacity test, (power battery or super capacitor) internal resistance test function. This gives it a unique advantage in battery and supercapacitor testing. The FT6400 has a rich interface, friendly interface and easy operation. Quickly operate and set up via the front panel TFT color display or VFD display, knobs and numeric keys. The FT6400 provides RS232, LAN, GPIB and other communication interfaces. These interfaces are connected to the computer and can be easily controlled remotely using standard SCPI programming instructions. The FT6400 electronic load provides over-current, over-voltage, over-power, over-temperature, voltage inversion, and other protection functions. It also has Von, Voff function and programmable protection for the device under test. These features greatly enhance the reliability of the product and are a trusted product for engineering test and automated test system integration.
The FT6300A series of electronic loads is a high-performance single-channel DC electronic load from Fisher Scientific. FT6300A series electronic load has a variety of models, power 0~1800W, voltage 0~500V, current 0~240A. Main applications include charger/adapter, switching power supply, LED driver, power battery, communication power supply, solar energy and its components, fuse/connector/relay/sensor, power electronic components and other products. Applicable to the application of related product research and development, production, quality inspection, quality control and other departments, FT6300A series electronic load is specially designed for the corresponding use. The FT6300A series of electronic loads provide basic functions such as CC, CV, CR and CP; dynamic and sequence test functions are provided to simulate changes in various loads; intelligent automatic test functions are convenient for production lines and quality inspection departments; analog LED characteristics, test LED drive; battery internal resistance and capacity test, use and battery test; solar PV VOC / ISC / PMAX / VMAX / IMAX / FF parameters one-click completion.
The FT6110 series multi-channel electronic load array is a high-performance, cost-effective product developed by Faith for the power ATE test system developed on the integration of the FT6100 series multi-channel electronic load array. In order to facilitate the development of power ATE test system, FT6110 has built-in special functions such as voltage and current ripple test, dynamic frequency sweep, load effect test, LED drive test, OCP test, slope setting, etc., and provides a complete DLL development kit. Support C#, C++, Delph, Labview development language to facilitate secondary development. The FT6110 is suitable for automation applications such as power production testing, aging, battery formation, burn-in testing, and harness testing. Such as: adapter power supply, LED power supply, DC converter, power tools, mobile phone charger, tablet charger, battery, uninterruptible power supply (UPS), battery management system (BMS) and other products ATE automated test system.
The FT6100 is a high-precision, high-reliability, high-integration, full-featured multi-channel programmable DC electronic load product developed by Faith based on years of experience in power electronics test applications. The products are tailored for integrated applications and are cost effective. It replaces low-power single-unit electronic loads in most integrated applications and provides significant cost savings for users. Designed specifically for embedded integrated applications, the FT6100 is available in a standard 19-inch chassis size with a flexible programming interface (RS485, LAN) and drivers. Supports most software platforms such as Visual C++, C#, Delphi, Visual Basic, and Labview for secondary development. Users can customize the application software according to their needs.
With its rich display screen, flexible operation mode, powerful recording, operation, control and management functions, and ultra-thin and beautiful aluminium alloy fuselage, the new T3 data monitoring host has been widely used in all walks of life. This product absorbs the advantages of various domestic and foreign data recorders, and adds new functions such as remote monitoring of the Internet of Things, wireless ultra-long distance communication of local area network, and applies the latest display technology, microelectronics technology, data storage and communication technology. It is a product with complete functions, convenient operation, accurate and reliable, and high cost-effective. This product is equipped with color LCD touch screen display. It can receive many kinds of current, voltage and resistance signals, realize the display, recording, overshoot monitoring, report generation, data communication, signal transmission and flow accumulation of physical quantities such as temperature, humidity, pressure, liquid level, flow rate, component and force, moment, displacement, and so on. It can also provide data communication function with PLC, which greatly improves the applicable scene of products. Creative acquisition & display remote wireless, fully isolated universal input, no wiring! The industry's first wireless acquisition system; display unit and acquisition unit separate design; 400 meters where to put where! And free access to the Internet of Things.
7-inch color touch screen, AC85265V/DC24V are available for electricity, USB interface easy to export data, embedded installation, 278*278 hole full isolation input, multiple signal acquisition embedded handheld easy to carry.